1. Download the SlugOS image from http://www.slug-firmware.net
2. Put the NSLU2 into Upgrade Mode
3. Disconnect any disks and/or devices from the USB ports.
4. Power off the NSLU2
5. Press and hold the reset button (accessible through the small hole on the back just above the power input).
6. Press and release the power button to power on the NSLU2.
7. Wait for 10 seconds watching the ready/status LED. After 10 seconds it will change from amber to red. Immediately release the reset button.
8. The NSLU2 ready/status LED will flash alternately red/green (there is a 1 second delay before the first green).
9. Flash the NSLU2 by using UpSlug or the Win32 Sercomm Utility
10. SSH into the new UnSlung unit and enjoy

RELATED WEBSITE LINKS

http://www.nslu2-linux.org - SlugOS wiki
http://www.slug-firmware.net/ SlugOS Firmware

PRODUCTS SHOWN
NSLU2 - http://en.wikipedia.org/wiki/NSLU2 $120 CDN

Adjustments in ACR
Demo white balance adjustments (color)
Demo "Exposure" and "Blacks" (The most important adjustments and why)
Demo "Recovery" and "Fill"
Demo "Clarity" and "Vibrance"
Demo "Saturation"
Remind everyone that we are adjusting meta data not the pixels in the file.

How to do more with less – use the network
Why do it?
What can you outsource – what is uniquely yours
External staffing – finding, managing and compensating
Projects vs Staff
Project management – making your work remotely accessible

RELATED WEBSITE LINKS
http://www.e-myth.com/
http://www.fourhourworkweek.com/
https://www.getfriday.com/
http://www.b2kcorp.com/
www.elance.com - for projects and people
www.craigslist.org - for people and projects
www.logmein.com - for remote access to your PC
www.thinkfree.com or www.zoho.com - for remote office